Search found 2383 matches

by kopius
Sat Mar 23, 2019 11:33 pm
Forum: Queensland Rocketry Society
Topic: 75mm Hardware
Replies: 1
Views: 44

Re: 75mm Hardware

broden wrote:Hi Everyone,

Due to unforeseen circumstances, we were just wondering if anyone happens to have a 75mm CTI casing and closures that they can bring to the launch tomorrow?

Cheers

Broden, it is a Gorilla 75mm FWD closure you need. Not CTI which we have.


Sent from my iPhone using Tapatalk
by kopius
Sun Mar 17, 2019 10:59 pm
Forum: Self Introductions
Topic: South Australia Gone Stale
Replies: 4
Views: 287

Re: South Australia Gone Stale

SA Rocketry is just about to kick off again.

There has been a lot of discussion and just about to go through final approvals for a new site to 8’500’

Watch this space!!


Sent from my iPhone using Tapatalk
by kopius
Mon Mar 11, 2019 12:02 am
Forum: Mid/High Powered Rocketry
Topic: Are all 38mm couplers the same?
Replies: 5
Views: 180

Re: Are all 38mm couplers the same?

I bought some 38mm coupler tube to make an avbay to fit into the payload section of a 38mm loc precision weasel. It was too big! The outer diameter of the coupler tube was closer to 39mm. Do I need to order a loc precision specific coupler? Sent from my iPhone using Tapatalk Different brands, mater...
by kopius
Sun Mar 10, 2019 11:58 pm
Forum: Mid/High Powered Rocketry
Topic: Are all 38mm couplers the same?
Replies: 5
Views: 180

Re: Are all 38mm couplers the same?

I can't really answer your question except that I had a similar issue, but in reverse. I bought some Loc body tubes that I planned to use with an old Estes nose cone. The fit wasn't even close. Estes and LOC tubes come from the same factory but are totally different sizes. Estes use the BT sizing (...
by kopius
Wed Feb 27, 2019 5:54 am
Forum: Thunda Down Under 2019
Topic: Thunda Registration is still "On Hold"
Replies: 3
Views: 493

Thunda Registration is still "On Hold"

Hi Steve, Apologies for the silence, I sent an email the other week when we spoke to say it is all good, we have a big session processing some of the orders that ended up on hold next week after Avalon Airshow. I understand you have been talking with the TAG as well about some international recognit...
by kopius
Thu Feb 07, 2019 7:17 am
Forum: Self Introductions
Topic: Batteries needed for Thunda
Replies: 9
Views: 973

Re: Batteries needed for Thunda

SpaceManMat wrote:Ha! Genuine Kopius Currency!

Absolutely hahaha


Sent from my iPhone using Tapatalk
by kopius
Wed Feb 06, 2019 10:11 am
Forum: Australian Rocketry
Topic: Fewatherweight Raven4 pre-order
Replies: 0
Views: 292

Fewatherweight Raven4 pre-order

Featherweight Raven4's are now available and Australian Rocketry has its first shipment on order. You can pre-order these immediately here: https://ausrocketry.com.au/raven-4.html
by kopius
Tue Feb 05, 2019 6:52 am
Forum: Self Introductions
Topic: Batteries needed for Thunda
Replies: 9
Views: 973

Re: Batteries needed for Thunda

jondubinsac wrote:So make it qty 2 400mah and 2 900mah. Sound okay? Let me know how to reimburse you.

Batteries received and will be waiting for you at Thunda ;-) we can just sort something out when you are here (I do like American bourbon... just saying lol)


Sent from my iPhone using Tapatalk
by kopius
Sat Jan 12, 2019 12:20 am
Forum: Self Introductions
Topic: Batteries needed for Thunda
Replies: 9
Views: 973

Re: Batteries needed for Thunda

G’Day,

What connectors do you need? We can prob just organise some batteries for you. AusRocketry carry’s varying types depending on devices being sold at the time, but if it is standard batteries for Altus Metrum, I’ll just get some in for you.

Cheers,

Blake


Sent from my iPhone using Tapatalk
by kopius
Sun Dec 30, 2018 6:17 am
Forum: Queensland Rocketry Society
Topic: Launch Tower
Replies: 4
Views: 430

Re: Launch Tower

Merry Christmas Joe,

We most likely do, just need to know whether to bring it or not as we don’t usually keep those in trailers for regular launches.

What is the over all OD of the fin tips?


Sent from my iPhone using Tapatalk
by kopius
Sun Dec 30, 2018 6:15 am
Forum: Support & Recovery & Misc.
Topic: Non-pyro system
Replies: 4
Views: 1164

Re: Non-pyro system

Perhaps I am misreading the original question, but if your are looking for a completely ‘pyro-less’ system, most of those co2 systems are no good as they all require an e-match firing a small BP charge. This is often an oversight that people claim pyroless, but it is more ‘minimal pyro’. If you do n...
by kopius
Sun Dec 30, 2018 6:10 am
Forum: How's the Weather..?
Topic: Cedar Grove launch site ?
Replies: 3
Views: 349

Re: Cedar Grove launch site ?

Merry Christmas David, you were only 5min from my place, shame I missed you coming past. That is actually really good for QRS as when the works are completed the land becomes unusable for development aka perfect for rockets. It has not hindered our launches at all and since it is a council project t...
by kopius
Thu Nov 01, 2018 5:10 am
Forum: Mid/High Powered Rocketry
Topic: Amateur rockets to the 100 km von Karman line for suborbital space.
Replies: 27
Views: 8054

Re: Amateur rockets to the 100 km von Karman line for suborbital space.

Steve Shannon wrote:
drew wrote:Thanks Steve, I'll chase this up with Dave directly and get back to you if he didn't receive it.

Thanks. I’d be happy to send it again.

Hi Steve, I know Dave has been away with work a bit, perhaps you could send the reports directly to AMRS: info@rocketry.org.au


Sent from my iPhone using Tapatalk
by kopius
Sun Oct 14, 2018 1:03 am
Forum: Queensland Rocketry Society
Topic: 14th October 2018 Launch “October Skies”
Replies: 19
Views: 14634

Re: 14th October 2018 Launch “October Skies”

QRS has been following the weather all week with only late afternoon showers that wouldn’t affect the launch. Unfortunately there has been a change in the weather pattern and 20mm of rain is predicted over the course of the event. To give everyone the best experience at Flames, Smoke & Noise, th...
by kopius
Mon Sep 10, 2018 10:31 pm
Forum: Australian Rocketry
Topic: Australian Rocketry shipping container pre-order announcement
Replies: 30
Views: 21410

Re: Australian Rocketry shipping container pre-order announcement

Ping Blake on info@ausrocketry.com. He is quite helpful and flexible at times :D He is, but I'm a bit worried for him. I've emailed and left voice mail and not heard back in the last couple of weeks. I also have an order sitting in "Processing". Does anyone know if everything is OK at AR?...

Go to advanced search