Joe Turner's 38mm Scratch-Build

Discussions for scratch builders. For the enthusiast that builds from the ground up. Tell us what you've built and what projects you working on in the space race.

Moderator: Moderators

joeman
Rocket Crew
Rocket Crew
Posts: 351
Joined: Fri Mar 06, 2015 9:05 am

Re: Joe Turner's 38mm Scratch-Build

Postby joeman » Mon Dec 10, 2018 9:48 pm

Thanks Snrkl,
I think that is the second time I've been caught out that way!


ok, on other news, I've been unable to locate my Buzzer, so I've created another one! The new one is a little louder than previous one and a little nicer looking in my opinion. I'll use this in the launch of this rocket.

IMG_7117_sml.jpg


Hope that spawns a few ideas!!
L1 - Callisto (H133) - 11-Jan-2016
L2 - March Fly (1633K940) - 18-Mar-2018 - RSO

joeman
Rocket Crew
Rocket Crew
Posts: 351
Joined: Fri Mar 06, 2015 9:05 am

Re: Joe Turner's 38mm Scratch-Build

Postby joeman » Fri Jan 04, 2019 9:27 am

Here are a few pictures of Some Fly-Away-Rails I've designed and printed.


They seem to work okay on the 1010 rail I have here.
i.e.
* With about additional 100 grams the "dummy" rocket slides down
* They open up promptly and in organized manner when "freed".

IMG_7269_sml.JPG
Overall appearance from side/back
IMG_7269_sml.JPG (200.69 KiB) Viewed 125 times


IMG_7270_sml.JPG
Clearance in T-Slot of 1010


[youtube]https://youtu.be/aEiiiI28YsI[/youtube]

Happy to share design with anyone.
L1 - Callisto (H133) - 11-Jan-2016
L2 - March Fly (1633K940) - 18-Mar-2018 - RSO

User avatar
SpaceManMat
Astronaut
Astronaut
Posts: 2107
Joined: Mon Dec 15, 2008 9:56 pm
Location: Brisbane

Re: Joe Turner's 38mm Scratch-Build

Postby SpaceManMat » Fri Jan 04, 2019 11:06 pm

Nice one. Need to get my act together and do some 3D printing.
QRS: 124
AMRS: 32 L2 RSO
Highest Altitude: 13,647 feet
Fastest Flight: Mach 1.55
Largest Motor: CTI 1115J530 IM
Current Project: X Wing

joeman
Rocket Crew
Rocket Crew
Posts: 351
Joined: Fri Mar 06, 2015 9:05 am

Re: Joe Turner's 38mm Scratch-Build

Postby joeman » Thu Jan 17, 2019 4:23 pm

Re parachute not inflating

Main charge fired at 800ft (and it did fire okay)

I followed:-

https://topflightrecoveryllc.homestead.com/Folding.html

And then I did fold over length wise to reduce total length... so yes I did add that step..... to reduce the total length.

I think if it was ejected without the cable cutter at apogee, it would inflate.


If the cable cutter was around the top part of the parachute, it might inflate (up to the cable cutter) at apogee. Then at 800ft, when MAIN fires the parachute may inflate completely.

Something to go over when I get back.

Thanks

Joe




Sent from my iPhone using Tapatalk
L1 - Callisto (H133) - 11-Jan-2016
L2 - March Fly (1633K940) - 18-Mar-2018 - RSO

User avatar
SpaceManMat
Astronaut
Astronaut
Posts: 2107
Joined: Mon Dec 15, 2008 9:56 pm
Location: Brisbane

Re: Joe Turner's 38mm Scratch-Build

Postby SpaceManMat » Thu Jan 17, 2019 6:17 pm

ok I think that final Z fold is not a good idea. If I needed to reduce the length I would do it after step 5, but I see they have an option to do that last but I don’t like how they’ve done it either. With the extra fold down internally placed it is basically trying to push open chute. You also want to have the outer edge of chute to be as large as possible - that is wrapping around everything else. You want the edge of the chute to catch the flow of air as it goes around the bundle, this is what opens it. Hope that makes sense.

Was there actually an issue with the cable cutter? The photo is not a great resolution so I cannot see if something is wrapped around the chute or not. I’ve not used a cable cutter but I would consider opening higher.
QRS: 124
AMRS: 32 L2 RSO
Highest Altitude: 13,647 feet
Fastest Flight: Mach 1.55
Largest Motor: CTI 1115J530 IM
Current Project: X Wing


Return to “Scratch Built”

Who is online

Users browsing this forum: No registered users and 5 guests