clust-o-matic

Moderators: PK, Moderators

Lister
Engineer
Engineer
Posts: 967
Joined: Fri Jun 05, 2015 5:36 pm
Location: Bendigo, Victoria

clust-o-matic

Postby Lister » Wed Jun 15, 2016 9:46 pm

Hi PK, do you have any of your Clust-o-matic's at the moment? I need one for a project.

Cheers, €Luke.

PK
...
...
Posts: 1711
Joined: Sun Jun 01, 2008 5:07 pm
Location: Perth
Contact:

Re: clust-o-matic

Postby PK » Thu Jun 16, 2016 8:17 pm

I could probably put one together. Might take a couple of weeks to get some PCB's made though. I'll dig out the files..
PK

I'm awesome!

vance2loud
Rocket Crew
Rocket Crew
Posts: 284
Joined: Wed May 14, 2014 12:44 pm
Location: Devonport, Tasmania

Re: clust-o-matic

Postby vance2loud » Thu Jun 16, 2016 8:39 pm

If you are getting the boards made up, sign me up for two while you are at it.
TRA #15165 AMRS #50
I do it because i can, I can because I want to, I want to because you said I couldn't. - Unknown
I have not failed. I've just found 10,000 ways that won't work.
- Thomas Alva Edison

vance2loud
Rocket Crew
Rocket Crew
Posts: 284
Joined: Wed May 14, 2014 12:44 pm
Location: Devonport, Tasmania

Re: clust-o-matic

Postby vance2loud » Thu Jun 16, 2016 9:17 pm

Only if you have to get the boards made, I probably won't require them till thunda but figure if you are getting boards made I might as well get in now.
TRA #15165 AMRS #50
I do it because i can, I can because I want to, I want to because you said I couldn't. - Unknown
I have not failed. I've just found 10,000 ways that won't work.
- Thomas Alva Edison

PK
...
...
Posts: 1711
Joined: Sun Jun 01, 2008 5:07 pm
Location: Perth
Contact:

Re: clust-o-matic

Postby PK » Thu Jun 16, 2016 10:49 pm

OK, sounds like it might be worth doing a batch. I'll post progress.
PK

I'm awesome!

Lister
Engineer
Engineer
Posts: 967
Joined: Fri Jun 05, 2015 5:36 pm
Location: Bendigo, Victoria

Re: clust-o-matic

Postby Lister » Thu Jun 16, 2016 11:33 pm

Thanks mate, No rush.. its a big project. I can probably find another half dozen customers for them if you want PK?

Sumo310
L3 Perfectionist
L3 Perfectionist
Posts: 2057
Joined: Wed Jun 20, 2007 7:48 pm
Location: BRISBANE, Aus

Re: clust-o-matic

Postby Sumo310 » Fri Jun 17, 2016 8:56 pm

I bought and never used a clustomatic years ago, and have subsequently misplaced the unit I had. Put me down for a replacement unit if you need the numbers for a new order PK.

Simon
L3

PK
...
...
Posts: 1711
Joined: Sun Jun 01, 2008 5:07 pm
Location: Perth
Contact:

Re: clust-o-matic

Postby PK » Fri Jun 17, 2016 9:17 pm

Sorry guys, but I've made the decision to step back (further) from hobby rocketry. This means no more making stuff for folks.
The build thread for the clust-o-matic has the schematics and parts, you should be able to put some together.

PK out...
PK

I'm awesome!

User avatar
Viking
Rocket Crew
Rocket Crew
Posts: 478
Joined: Sat May 16, 2015 2:54 pm
Location: Perth WA

Re: clust-o-matic

Postby Viking » Fri Jun 17, 2016 10:37 pm

Simon

Lister
Engineer
Engineer
Posts: 967
Joined: Fri Jun 05, 2015 5:36 pm
Location: Bendigo, Victoria

Re: clust-o-matic

Postby Lister » Fri Jun 17, 2016 11:29 pm

Oh really.. bugger, I was really looking forward to being able to air start a half dozen motors. Thanks anyway PK, I will see if I can find something somewhere else unless someone has one they could sell me.. it will be going to a very cool/crazy rocket.

User avatar
Happy Heyoka
Rocket Flyer
Rocket Flyer
Posts: 147
Joined: Wed Jul 22, 2015 7:01 pm

Re: clust-o-matic

Postby Happy Heyoka » Tue Jun 28, 2016 12:34 am


User avatar
Happy Heyoka
Rocket Flyer
Rocket Flyer
Posts: 147
Joined: Wed Jul 22, 2015 7:01 pm

Re: clust-o-matic

Postby Happy Heyoka » Tue Jun 28, 2016 1:01 pm


User avatar
CATO
Mr Smiley
Mr Smiley
Posts: 2046
Joined: Thu Dec 24, 2009 6:20 pm
Location: Sydney, NSW
Contact:

Re: clust-o-matic

Postby CATO » Tue Jun 28, 2016 2:41 pm

IIRC, the Clust-O-Matic was good for 50V, 11Amp per channel (N-Channel SFET).

"In thrust we trust"

AMRS 21 L3 RSO
TRA 07459 L3


vance2loud
Rocket Crew
Rocket Crew
Posts: 284
Joined: Wed May 14, 2014 12:44 pm
Location: Devonport, Tasmania

Re: clust-o-matic

Postby vance2loud » Tue Jun 28, 2016 3:05 pm

From what I could find they used a NIF5003N smartFET 42v 14A.
has a broken link that refers to this.
If someone still has one they might be able to get some photos to help.
TRA #15165 AMRS #50
I do it because i can, I can because I want to, I want to because you said I couldn't. - Unknown
I have not failed. I've just found 10,000 ways that won't work.
- Thomas Alva Edison

User avatar
CATO
Mr Smiley
Mr Smiley
Posts: 2046
Joined: Thu Dec 24, 2009 6:20 pm
Location: Sydney, NSW
Contact:

Re: clust-o-matic

Postby CATO » Tue Jun 28, 2016 3:11 pm

"In thrust we trust"

AMRS 21 L3 RSO
TRA 07459 L3



Return to “Whooshtronics”

Who is online

Users browsing this forum: No registered users and 1 guest