Need some help for Thunda

Australian Rocketry's Thunda Down Under 2015

Moderator: Moderators

bandman444
Rocket Onlooker
Rocket Onlooker
Posts: 3
Joined: Thu Jul 28, 2011 2:56 pm

Need some help for Thunda

Postby bandman444 » Thu Feb 26, 2015 6:44 pm

Hello,

I am very excited to be attend TDU in a couple weeks and need some help to finish up the fun part of the trip, FLYING rockets.

I will be bringing a carbon fiber Madcow Rocketry 98mm MD Tomach, ready for any motor you could throw at it. And I have been talking to Blake, and I think he still has a CTI N10,000 available. The problem is I would need to borrow the CTI Pro98 6G case that it needs.

I am also selling a Pro75-6XL Case w/closures if anyone is interested in buying.

Thanks guys, look forward to seeing you out there!

User avatar
OverTheTop
It's only money...
It's only money...
Posts: 2457
Joined: Sat Jul 21, 2007 2:20 pm
Location: Melbourne, Australia

Re: Need some help for Thunda

Postby OverTheTop » Thu Feb 26, 2015 7:12 pm

Hi Bandman. I have a CTI 98mm 6G casing that will be somewhat busy. I have one flight slated for it, as soon as possible during Thunda, for my L3.

Someone else also has dibs on using it for a flight, so if you form an orderly queue you are welcome to use it. It is on the usual "you lose it or blow it up you replace it" deal.

Hope that helps.
TRA #13430
L3
"Everybody's simulation model is guilty until proven innocent" (Thomas H. Lawrence 1994)

matthew
Cairns...no where near that
Cairns...no where near that
Posts: 709
Joined: Mon Apr 30, 2007 2:02 pm
Location: Cairns, Qld

Re: Need some help for Thunda

Postby matthew » Thu Feb 26, 2015 8:26 pm

bandman444 wrote: .. carbon fiber Madcow Rocketry 98mm MD Tomach, .. CTI N10,000 ..


:D

I'm going to be so busy watching all these great flights, I'll find it hard to prep anything myself. :lol:
Matthew Small
AMRS #33 L3
TRA #11466 L3
QRS #133


http://australianrocketry.org

User avatar
cryoscum
STOP... Hammer Time The Prodigy
STOP... Hammer Time    The Prodigy
Posts: 1802
Joined: Wed Oct 06, 2010 2:54 pm
Location: QLD, NSW & VIC

Re: Need some help for Thunda

Postby cryoscum » Thu Feb 26, 2015 8:27 pm

Hi Bryce, I have a 6gxl case with the required spacer. It should be available sometime Friday morning, assuming I get it back from my own flight... The standard "you-stuff-it-you-own-it" rule goes without saying, of course...
See you there.
AMRS L3 | NAR L3 | QRS 089 | MDRA 224
AMRS Technical Advisory Group

Total impulse for 2016: 32,458 Ns (thus far)
Total impulse for 2015: 84,231 Ns
Total impulse for 2014: 40,757 Ns
Total impulse for 2013: 62,927 Ns

bandman444
Rocket Onlooker
Rocket Onlooker
Posts: 3
Joined: Thu Jul 28, 2011 2:56 pm

Re: Need some help for Thunda

Postby bandman444 » Fri Feb 27, 2015 8:36 am

Awesome. Thanks guys.


Return to “Thunda Down Under 2015”

Who is online

Users browsing this forum: No registered users and 1 guest